High pressure fire-extinguishing device HDL 250, instantaneous fire-fighting without set-up times, built-in unit without water tank (withdrawal of water required from tank of vehicle), fire-fighting pressure 250 bar, capacity of high pressure pump 23 l/min, thermovalve, driven by petrol engine 13.2 kW, fire- extinguishing hose 60 m, DUPLEX fire-extinguishing attachment for spray stream and low expansion foam |
Dimensions | 980 x 560 x 560 mm |
Weight | 138 kg (without tank) |
Type of power engine | 4-stroke petrol engine, 2 cyl. 13.2 kW |
Type of starting | electric / recoil rope starter |
High pressure plunger pump | 3 cyl. 23 l/min |
Maximum fire-fighting pressure | 250 bar |
High pressure fire-extinguishing hose | 60 m (500 bar) |
Water tank | - |
Suction of foam agent | serially |
Spray pistol | DUPLEX fire-extinguishing attachment |
Short time of setting-up in case of fire optimum use of the cooling effect of water quench effect by vaporization of water extremely short time of fire-extinguishing little recoil minimum water consumption of maximum 23 l/min avoiding of damage caused by fire-extinguishing water and prolongation addition of foam agents only when needed small built-in measurements in vehicle
© 2024 Agni Industries Fire Service
Powered By GRP